深圳市世邦欣科技有限公司
中文版本中文版ENGLISHENGLISH
服務熱線:0755-84749303
  • 橡膠管條廠房車間一角
  • 歡迎來電咨詢硅橡膠制品
  • 專業硅膠管廠家為您服務
  • 高彈力彩色乳膠管條
  • 乳膠管無毒環保耐高溫
網站首頁 公司簡介 產品展示 生產設備 硅膠資訊 人才招聘 留言反饋 聯系方式
硅膠資訊
 
您現在的位置:首頁 > 硅膠資訊 > 公司新聞公司新聞

龍華世邦欣橡膠制品讓你了解更多橡膠的種類和特性

發布時間:2011-3-1 點擊:6311 字體大?。?span onClick="javascript:fontSize('news_content','12px')">小 返回
氫化丁晴橡膠(HNBR) 丁二烯和丙烯晴的共聚體。
它是通過全部或部分氫化NBR的丁二烯中的雙鍵而得到的。其特點是機械強度和耐磨性高,用過氧化物交聯時耐熱性比NBR好,其他性能與丁晴橡膠一樣。缺點是價格較高。使用溫度范圍:約-30℃~+150℃。
主要用于耐油、耐高溫的密封制品。
Hydrogenated nitrile rubber (HNBR) of butadiene and acrylonitrile copolymer.
It is through full or partial hydrogenation of the double bond of butadiene NBR while to get. Characterized by high mechanical strength and wear resistance, cross-linked with peroxide when good heat resistance than NBR, NBR other properties and the same. The disadvantage is higher prices. Operating temperature range: about -30 ℃ ~ +150 ℃.
Mainly used for oil, high temperature sealing products.
  硅橡膠(Q) 為主鏈含有硅、氧原子的特種橡膠,其中起主要作用的是硅元素。
其主要特點是既耐高溫(最高300℃)又耐低溫(最低-100℃),是目前最好扥艾寒、耐高溫橡膠;同時電絕緣性優良,對熱氧化和臭氧的穩定性很高,化學惰性大。缺點是機械強度較低,耐油、耐溶劑和耐酸堿性差,較難硫化,價格較貴。使用溫度:-60℃~+200℃。
主要用于制作耐高低溫制品(膠管、密封件等)、耐高溫電線電纜絕緣層,由于其無毒無味,還用于食品及醫療工業。
Silicone rubber (Q)-based chain containing silicon and oxygen atoms of special rubber, which play a major role in the silicon.
Its main characteristic is both high temperature (up to 300 ℃) and low temperature (minimum -100 ℃), Ai is the best Alto, cold, high temperature rubber; both excellent electrical insulation on the thermal stability of high oxidation and ozone chemical inert. The disadvantage is lower mechanical strength, oil, solvent and acid poor, difficult to cure more expensive. Temperature: -60 ℃ ~ +200 ℃.
Mainly for the production of high and low temperature products (hoses, seals, etc.), high temperature wire and cable insulation, because of its non-toxic and tasteless, but also for food and medical industries
   氟橡膠(FPM) 是由含氟單體共聚而成的有機彈性體。
其特點耐溫高可達300℃,耐酸堿,耐油性是耐油橡膠中最好的,抗輻射、耐高真空性能好;電絕緣性、機械性能、耐化學腐蝕性、耐臭氧、耐大氣老化性均優良。缺點是加工性差,價格昂貴耐寒性差,彈性透氣性較低。使用溫度范圍:-20℃~+200℃。
主要用于國防工業制造飛機、火箭上的耐真空、耐高溫、耐化學腐蝕的密封材料、膠管或其他零件及汽車工業。
ction of high and low temperature products (hoses, seals, etc.), high temperature wire and cable insulation, because of its non-toxic and tasteless, but also for food and medical industries
Viton (FPM) is formed by the monomer of organic fluorine-containing elastomers.
Characterized by high temperature up to 300 ℃, acid and alkali, oil is the oil and rubber in the best radiation resistance, high vacuum performance; electrical insulation, mechanical properties, chemical resistance, ozone resistance, resistance to atmospheric aging resistance are excellent. The disadvantage is poor processing, poor cold tolerance expensive, flexible low permeability. Operating temperature range: -20 ℃ ~ +200 ℃.
Mainly used in defense industry manufacturing aircraft, rocket-resistant vacuum, high temperature resistance, chemical corrosion sealing materials, hoses or other parts and the automotive industry.
上一條: 深圳市世邦欣科技有限公司新網站已上線
下一條: 你知道的硅膠產品的相關述語嗎?
網站首頁 | 關于世邦欣 | 硅橡膠產品 | 生產設備 | 硅膠資訊 | 人才招聘 | 留言反饋 | 聯系方式 | 網站地圖 | 硅膠管 | 乳膠管
版權所有:深圳市世邦欣科技有限公司 電話:0755-84749303 傳真:0755-89319880 網址:http://www.gtechelec.com 粵ICP備11058864號 
世邦欣膠管微信二維碼
青青草视频在线